Procedure

The following test procedure must be followed every time:

• A board is soldered
• A chassis structure or support material is machined and is being test fitted with another component
• A major orbital mechanics simulation is run
• A major software test is run
• A major thermal simulation is performed
• A vibe test is done
• A TVAC test is done
• A radiation test is done
• Other important tests are performed

1. Create a copy of the Testing Documentation Template
2. Before performing these tests, fill out the purpose, test procedure, and metrics sections of the template.
3. After performing the test, fill out the other sections.

If the test involves more than one subteam, place the document in the tests folder under Integration Documentation.