The ADCS ‣ page offers shortlists of possible components that meet ADCS requirements and that the sub-team may want to use to accomplish its goals.

• [x] Reaction Wheels x4: Note: reaction wheels are very expensive, so for the 1st iteration of the PCB board, look into sourcing “mock” reaction wheels of similar size and power requirements as the space-grade reaction wheels that would be sourced for the 2nd iteration. One possibility is looking into servo motors as “mock” reaction wheels
  • Series 1509T06B Flaulhaber B-Flat
• [ ] Sun Sensors x3 Note: sun sensors may not need to be included on the ADCS PCB board. They may be implemented, instead, on the satellite’s solar panels.
  • MLX75306KXZ-BAA-000-RE
• [x] IMUs x1
  • ICM-20948 M ← Out of stock
  • $19.67: ICM-30670
  • $16.07: ISM330DHCXTR
  • $37: **LSM9DSITR ← Out of stock**
• [x] Gyroscopes x3
  • IAM-20380
• [x] Magnetometers x3
  • $7.22: MLX90395KGO-BBA-101-SP
    • Hall Effect sensing
    • Responds to perpendicular fields
  • $6.54: MMC5983MA
    • Magnetoresistive sensor
    • More sensitive
    • Omni polar
    • Responds to parallel fields
    • Good at unipolar sensing for precision, non contact of displacement applications
    • 18 bit operation ← idk if this is an issue since most are usually 16 bit operation

Note: the IMU, gyroscopes, and magnetometers may be found in an all-in-one component. If possible, source this component.