• [ ] Test deployment switch mechanism
  • [ ] Interface with EPS if possible
  • [ ] Check if it meets CSDC requirements

EPS

MOST UPDATED: [ DATE ]

• [ ] Sense current and voltage values off of all subsystem boards
• [ ] Have a way to be able to send current and voltage data to CDH MCU and then to EPS MCU (verify communication system)
• [ ] Working power rails
  • [ ] Test a mock reaction wheel
  • [ ] Power comms boards on transmit and receive mode
• [ ] Supply boards with an external power supply to mimic solar cells
• [ ] Four working MPPT boards
• [ ] Optionally integrate system into PC/104 stack

Payload

MOST UPDATED: [ DATE ]

• [ ] Be able to receive and process command to take photo from CDH
• [ ] Be able to take photo
  • [ ] Have some kind of image compression
  • [ ] Send compressed image back to CDH MCU
  • [ ] Drivers to communicate between MCU and camera
• [ ] Filters and Optics selected
  • [ ] Mechanical mountings designed

CDH

MOST UPDATED: [ DATE ]

CDH FlatSat Requirements

• [ ] OBC
  • [ ] RM46 boots up → runs sfsf software successfully
  • [ ] Blink LEDs
• [ ] Software